New bolts required,they are "use once"stretch bolt.Also,an angle gauge is required,or you can make one from card.
Torque to 35Nm + 45 degrees + 15 degrees.
What are the torque wrench settings for a 1993 daihatsu charade with g202 1.0 litre petrol engine?
Approx 43.4249 ft-lb so if u set it around 45 ft-lb you'll be right :)
thats for a 1.3 litre.
How do you set the timing on a vauxhall corsa 1.4?
Help in setting a cam belt pulley
Torque setting for Renault megane 1600 big end?
connecting rod(big end) cap ; stage 1
What are the torque setting for head studs of a Toyota corolla 2003 VVTI 1.4 engine?
standard torque on any head is about 80 lbs to 90 lb torque
What are the cylinder head bolt torque settings on a 1994 Jeep Cherokee 4.0L engine?
Torque settings are 110 ft LBS for nine of the ten bolts one bolt is 100 ft LBS /#1 Tighten all bolts in sequence 1 to 10 at 22 ft LBS #2 tighten all bolts 1 to 10 at 45 ft LBS #3 tighten all bolts 1 to 6 at 110 ft LBS #4 bolt #7 at 100 ft LBS #5 BOLT 8 TO 10 AT 110 FT LBS . HEAD TIGHTEN SEQUENCE - standing at front of car bolts down left side are 8/4/1/5/9 bolts down right side are 7/3/2/6/10. left side meaning distributor side.
What is the big end bearing torque wrench settings for a ford fiesta ST150 2.0 duratec?
What is the big end torque setting for a fiesta st150
Big ends torque opel corsa 1.4i utility?
what is the torque settings on the big ends and conrods on the opelcorsa 1.4 utility